Grease Points and intervals on Scag V-Ride II Mowers
SVRII-32A / SVRII-36A / SVRII-48V / SVRII-52V / SVRII-61V
Regularly greasing your Scag V‑Ride II is one of the simplest and most important steps in protecting your mower’s performance and longevity. The machine’s pivot points, caster assemblies, and deck components all rely on proper lubrication to reduce friction, prevent premature wear, and keep the mower operating smoothly in demanding commercial conditions. Following the manufacturer‑recommended greasing intervals ensures each component receives the protection it was engineered for, helping you avoid costly repairs, extend equipment life, and maintain the crisp, reliable cut Scag machines are known for.
Grease Fittings
- Caster Wheel Pivot* – Grease every 500 Hours or Yearly
- Cutter Deck Belt Cranks – Grease every 100 Hours or Every Other Week
- Cutter Deck Spindles – Grease every 40 Hours or Weekly
- Cutter Deck Pusharms – Grease every 100 Hours or Every Other Week
*Procedure: Remove grease cap (P# 484195). Remove plug (P# 482028-01) and install grease zerk. Apply to the fitting until new grease appears at the top of the caster extension. Remove the grease zerk and reinstall the plug. Reinstall the grease cap. Special tool (P# 47007) is recommended for use in the installation of the grease cap.